Table of Contents
FANUC CNC GUIDE
In the field of precision machining, mastering the FANUC operating system is an essential skill. However, direct training on real machines often carries the risk of equipment damage and high operating costs. FANUC CNC GUIDE emerged as a perfect solution, providing a visual 3D simulation environment, allowing users to learn and test machining programs directly on their personal computers.
FANUC CNC GUIDE is the official simulation software developed by FANUC Corporation. It replicates the entire interface, control panel, and processing logic of popular controller series such as the 0i-F, 30i-B, and the latest models.
Unlike conventional CNC simulation software, CNC GUIDE uses FANUC’s own source code (engine), ensuring that all G-code commands, cycles, and parameters function 100% identically to what happens on a real machining machine. See more CGTech VERICUT
Features FANUC CNC GUIDE
- Visual 3D Graphics Simulation
- The software integrates 3D toolpath simulation capabilities (Machine Composition). Users can observe the material cutting process and check for collisions between the tool, workpiece, and fixture. This completely eliminates programming errors before actual production.
- Manual Guide i Dialogue Programming Support
- One of FANUC’s strongest points is its Manual Guide i dialogue programming system. On CNC GUIDE, you can practice creating face milling, cavity milling, drilling, and thread turning cycles by entering parameters into intuitive guide tables without needing to memorize too many complex command codes.
- Parameter and Offset Management
- Users can practice setting workpiece coordinates (Work Offset G54-G59), setting tool length compensation (Tool Length Offset), and editing system parameters. These are extremely important skills that machine operators need to master.
- Networking and Data Transmission
- CNC GUIDE supports the simulation of Ethernet and FOCAS connection protocols. This allows third-party software developers to test the connectivity between a computer and the FANUC controller without the need for actual hardware.
- Benefits of Using FANUC CNC GUIDE in Manufacturing and Training
- For Training Institutions and Students
- Absolute safety: Students can freely experiment with new G-code commands without worrying about collisions damaging the spindle or breaking the tool.
- Cost savings: A computer lab equipped with CNC GUIDE has a much lower investment cost than purchasing dozens of actual CNC milling and turning machines.
- Flexible time: Students can practice programming at home or in class at any time.
- For Businesses and Mechanical Workshops
- Optimized machine runtime (Cycle Time): Programming engineers test the program on the software beforehand. When the machine is brought in, the operator simply mounts the workpiece and runs, reducing downtime for error checking.
- On-site training: Easily instruct new employees on how to use the control panel, enter commands, and handle common errors on the FANUC screen.
- Increased productivity: Minimizes the rate of defective products due to programming errors, incorrect coordinates, or incorrect machining cycles.
System requirements FANUC CNC GUIDE
- Windows 10, 11 – 64 bit
- Intel 2nd Generation i5 (released 2011)
- AMD CPU (released 2011) and later, with AVX
- RAM: 8GB (16GB and higher is recommended)
- GPU: 4GB VRAM
- DirectX 12 compatible
FANUC CNC GUIDE Free Download
FANUC CNC guide 25.0
FANUC CNC GUIDE 2 v33.10
Google DriveFileOutFshareTeleGram
How to install FANUC CNC GUIDE
- Turn off anti-virus software (Note also turn off Windows Defender)
- Extract the downloaded software
- Run the Setup file to install the software
- Readme.txt
- Done
